Installation
- Using antenna cable (or any 50-ohm low-loss coaxial cable)          Connect the antenna to the receiver or distribution system.
- If the cable is short, reduce the gain setting; if the cable is long, increase the gain setting.
If the cable is short, lower the gain setting; if the cable is long, raise the gain setting. It should be noted that signal loss is not only a function of cable quality, but also of cable length.
It should be noted that signal loss is not only related to the quality of the cable, but also to the length of the cable. Contact the cable manufacturer for specifications on cable signal loss.
Contact the cable manufacturer for technical specifications on cable signal loss.
- Aim the antenna at the area to be covered. Distributor main unit technical parameters: Frequency range: 450 to 970
Frequency range: 450～970MHZ         Impedance: 50Ω         Input voltage: DC 12V 5A          Output DC voltage: 12V four sets of DC output terminals       Antenna increase voltage: 12V 150mA
Host size mm: 480 × 200 × 45mm (LWH) Active pointing antenna        RF signal over strength indicator threshold: -5dBm Product list:           4-way 8-channel distributor host 1pc
Antenna wing leaf 2 pcs         3 metres cable to connect the antenna (you can contact the manufacturer to choose a longer cable) 2 pcs.           50cm BNC-BNC or BNC-TNC cable 10 pcs.
Power DC cable 4 pcs       12V 5A switching power supply 1pc        Packing (Aluminium box + outer box) or (American cow colour box) 1 set        Frequency range: 470~960MHz
Gain: -6dB~12dB (4-speed toggle adjustable)         Interface: BNC Impedance: 50Ω         Receiving angle：70°         Voltage: 9~12V