The 16 channel antenna distributor is a UHF antenna distributor for all channels The system can guide antenna signals from a pair of antennas in a multi-channel system Line to multiple receivers for use. The distributor will amplify the RF signal to compensate for it Attenuation during the allocation process. Low noise high-quality components can maintain clarity Clear signal with the lowest distortion. External 12V5A switch power supply, capable of Provide four sets of 12V DC power supplies to the wireless receiver. 

One 16 channel day The line distributor host can support up to 16 antenna channel ports. broadband Dao Design is capable of connecting with all wireless microphones operating within the frequency range Receiver compatibility. By using a logarithmic periodic dipole array, it is possible to face the desired direction Provide the best reception effect when covering the area. Integrated amplifiers have the ability to increase Benefit setting, used to compensate for different levels of coaxial cable signal loss. approve It can be fixed on the microphone stand or hung from the ceiling, or The device is fixed to the wall using an integrated rotatable adapter. characteristic Low noise signal amplifier can compensate for the insertion loss of coaxial cable The wireless receiver and antenna distribution system are compatible, and the receiver needs to be able to Capable of providing 9-12V DC bias voltage install 

• Use antenna cable (or any 50 ohm low loss coaxial cable) Connect the antenna to the receiver or distribution system. If the cable is short, the gain setting should be reduced; If the cable is long, it should Increase the gain setting. It should be noted that signal loss is not only related to cable quality It also depends on the length of the cable. Technical specifications for cable signal loss Please contact the cable manufacturer. Align the antenna with the area that needs to be covered during use. Distributor host technical parameters: Frequency range: 450-970MHz Impedance: 50 Ω Input voltage: DC 12V 5A Output DC voltage: 12V, four sets of DC output terminals Antenna amplification voltage: 12V 150mA Host size mm: 480 × 200 × 45mm (length, width, height) Active directional antenna Frequency range: 470-960MHz Gain: 3dB/12dB (built-in 2-level adjustable) Interface: BNC Impedance: 50 Ω Receiving angle: 70 ° Voltage: 9-12V Packing list: 16 channel distributor host